K-Tec Tricerabox 3-point Hitch Box Blade

K Tec Tricerabox

The K-Tec Tricerabox is a 14-ft.-wide box blade that mounts to the three-point hitch on the rear of a 500-hp+ tractor to enhance earthmoving operations.

Leveling blade pulls material forward or can be used backwards to push doze material
Seven ground ripper shanks are hydraulically operated to lower for engaging the ground for ripping up hard soil or aerating wet jobsites
Back blade allows for the operator to complete backfilling of soil work to fully smooth out the cut and fill zones
Three-point hitch may be modified to have a scraper hitch hookup, enabling the tractor to fill in as a bulk dirt hauler when needed

Fill out the form below to request more information about K-Tec Tricerabox 3-point Hitch Box Blade

Cleaning Up the Cold War: Wyoming Uranium Mine Reclamation Project

Summit Excavation & Grading used two Volvo 40-Ton Articulated Dump Trucks each pulling two K-Tec 1237ADT train scrapers on the former uranium mine site — the McIntosh Pit, a multi-phase reclamation near Jeffrey City, Wyoming.

Summit utilized two Volvo 40-ton articulated dump trucks pulling K-Tec 1237ADT scrapers (such as shown) in a train configuration on the long haul from the east spoil pile.

K-Tec Earthmoving Support Tractor (EST)

Unit consists of a Case IH wheel tractor with a K-Tec Ox Block and a Tricerabox

K Tec Est Earthmoving Support Tractor

K-Tec 1613FX Land Leveler

Heavy-duty land leveler box scrapers targeted to the construction, agriculture and landscaping industries

K Tec Land Leveler

K-Tec Earthmovers and Ashland Industries Merge

Ktec Ashland Team

K-Tec Earthmovers Showcasing 7 New or Updated Machines at CONEXPO 2020

Pan-scraper specialist K-Tec will demonstrate equipment hourly, feature the first pull-pan scraper telematics system and a Virtual Reality experience to simulate scraper ride and machine controls.

K-Tec 1030 concept scraper

K-Tec EJB Ejector Body for Volvo Articulated Trucks

K-Tec’s innovative Ejector Body (EJB) allows for trucks to safely eject loaded material in areas with reduced overhead clearance.

Ktec Ejb Ejector Body

Scrapers Help Shave Over $1 million in Lagoon Construction Project Costs

Earth Max Construction used scrapers to boost production capacity and reduce costs on two lagoon construction projects.

Earth Max started out with a used K-Tec scraper and later purchased two new K-Tec 1233 scrapers, each of which holds a 33-cu.-yd. heaped capacity.

[VIDEO] K-Tec Scrapers Used in Lagoon Construction Projects

In 2017, Earth Max Construction was awarded a pair of lagoon pond projects in rural southern Manitoba, Canada.

Hqdefault 5a29b56ee6427

[Brochure] K-Tec 1263 ADT Dirt-moving Scraper

The K-Tec 1263 ADT is designed for push-loading while being pulled with a 40-ton, 450+ horsepower rock truck power unit.

Tandem Scrapers Move 850,000 cu. yds. in 45 Days for Dairy Feedlot Pad

Two K-Tec 1263 ADT pull-pan ejector scrapers averaged a loading time of 90 seconds per scraper.

K Tec 1263ADTJohn Deere 3 57b376736e6b1

[VIDEO] Scraper Selection: 6 Factors That Determine Whether to Use Direct Mount or ADT

This informational video will help contractors determine which scraper setup can move the material most efficiently.

[Video] Scraper Selection: 6 Factors That Determine Whether to Use Direct Mount or ADT

K-Tec 1228ADT Scraper

K-Tec Earthmovers' 1228ADT scraper is designed to move a heaped capacity of 28 cubic yards with a 30-ton articulated dump truck

Ktec 1228ADTpress 5695116e707c8