C310A

Ad171b2e

RANGE OF APPLICATIONS.
When static compaction is required, the 7 ton (6.35 mt) and 10 ton (9 mt) models perform in a wide range of applications from highway construction to driveways,base to finish layers. Linear force is easily adjusted by adding or reducing ballast in the drums.

SPLIT FRONT DRUM.
The 50 (1270 mm) split front drum enables the outer half of the drum to rotate faster than the inner half resulting in quick work on corners and curves,without mat tearing. PRESSURIZED WATER SPRAY.
Two (2) 100 gal (378 L) tanks supply the pressurized feed system with eight (8) intermittent spray settings. Five (5) nozzles and cocoa mats on the front and rear drums provide optimal drum coverage

POWER TO PERFORM.
A Cat C3.4B Tier 4F engine with 74 hp (55 kW) powers both the C307A and C310A to a maximum speed of 10.5 mph (16.9 km/hr) with a 12' 6 (3.8 m) inside turning radius.

VISIBILITY AND CONTROL.
Dual seats with 5-position pivot steering wheel and low profile hood design enhance operator sight lines. Controls within easy reach of the operator and optional airsuspension seat help reduce fatigue.

FAST SERVICE.
Plastic fuel tank prevents rusting. Spra ynozzles and filters are easily removable by hand. Extended life water pump. Routine service and grease locations are easily accessible.

Fill out the form below to request more information about C310A

Weiler World Of Asphalt Preview 2025

Visit Weiler at World of Asphalt booth #4113.

Weiler E2850 C Working

AEM Makes First Tour Stop at Weiler

AEM’s first stop on the AEM Manufacturing Express bus tour was at Weiler, which manufactures heavy equipment for the asphalt and road building industry, including remixing transfer vehicles, commercial pavers and more.

Weiler’s president and CEO, Pat Weiler thanked employees for the hard work and dedication during the AEM Manufacturing Express stop on July 1 in Knoxville, Iowa.

P65

The gravity fed 6-ton (5.4 mt) hopper features an hydraulically raised floor and wings with two independently operated hydraulic cut-off doors for exceptionalmaterial management.

P395

Engineered and built to exceed the demands of commercial paving, the Weiler P395 incorporates proven designs with new innovations to provide performance, reliability and outstanding mat quality in a wide range of applications.

P385B

Engineered and built to exceed the demands of commercial paving, the Weiler P385B incorporates proven designs with new innovations to provide performance,reliability and outstanding mat quality in a wide range of applications.

P265

Mechanical controls provide simple and reliable operation. Push button keypads for feeder system and cable operated ground drive controls allow operation from either side of the machine.

P195

Engineered and built with versatility in mind, the Weiler P195 incorporates proven designs with new innovations to provide performance, reliability andoutstanding mat quality in a wide range of applications.

CT3

VERSATILE COMPACTION. The 9-wheeled pneumatic roller provides kneading action for a smooth surface finish with a 60 (1.52 m) compaction width for optimal coverage.

C307A

RANGE OF APPLICATIONS. When static compaction is required, the 7 ton (6.35 mt) and 10 ton (9 mt) models perform in a wide range of applications from highway construction to driveways,base to finish layers.

C303

VERSATILE COMPACTION. The 9-wheeled pneumatic roller provides kneading action for a smooth surface finish with a 60 (1.52 m) compaction width for optimal coverage.

The Weiler Watch Asset Management System

The Weiler Watch asset management system provides customers with extensive fleet management capabilities for Weiler material transfer vehicles.

Weiler Unveils New Innovations at World of Asphalt

Nigel McKay, Sales Manager at Weiler, talks about the latest technologies on the showfloor at World of Asphalt. Stop by booth 2349 this week to learn more.